top of page
lalit-kumar-HpPmiduLDC0-unsplash.jpg
1.79
1.78

Dimension (unit: mm)

微信图片_20260514100830_137_148.png
WHY - WP9
LED Wall Pack
Key Features
 

  • 130 lm/W High-Efficiency Output — Achieves 130 lm/W system efficacy across all six configurations (20W–120W) for significant long-term energy savings.

  • Universal Voltage Compatibility — Accepts 100-277 VAC at 50/60Hz with no installation restrictions, ideal for global deployment.

  • Die-Cast Aluminium Housing — Sand-blasted ADC12 aluminium delivers antistatic, high-temperature, and corrosion-resistant performance for outdoor durability.

  • Moisture-Proof Silicone Sealing — IP65-rated silicone gasket sealing prevents moisture and water ingress, extending fixture service life.

  • Stable, Flicker-Free Driver & 5-Year Warranty — High power factor (>0.9) and low-THD driver ensure consistent, flicker-free output, backed by a comprehensive 5-year warranty.

Application

Architectural wall (airport, exhibition, residence, schools, hotels)

​​Product Parameters​​​​​​​​​​​​​​​​​​​​
微信图片_20260514100721_136_148.png
Installation 
WP7 LED Wall Pack Light Spefication_04.png

1. Take apart the PC cover and fixture housing.

2. Put the fixture on the wall, drill 3 holes to get through.

3. Insert expansion screws into the holes, match the fixture to the bolts, then fix the fixture on the wall with screws; lastly, put the PC cover and fixture housing back together.

WP7 LED Wall Pack Light Spefication_04.png

1. Loosen screws and remove the front lens set carefully from the back plate.

2. Remove the 1/2'' plug from where you intend to feed conduit.

3. Drill out the holes (C) to secure it on the wall by choosing proper screws.

4. Finish wiring (Black for line, White for neutral, and Green/Yellow Green for ground).

5. Replace the lens set on the hinge and finish the connection. Close the lens set and tighten the screws to fasten the lens set to the backplate.

bottom of page